模块:Citation/CS1/People
跳转到导航
跳转到搜索
此模块的文档可以在模块:Citation/CS1/People/doc创建
--[[--------------------------< F O R W A R D D E C L A R A T I O N S >--------------------------------------
]]
local cfg;
local in_array, is_set;
local append_error, add_maint_cat, select_one;
local make_internal_link;
--[[--------------------------< A D D _ V A N C _ E R R O R >----------------------------------------------------
Adds a single Vancouver system error message to the template's output regardless of how many error actually exist.
To prevent duplication, added_vanc_errs is nil until an error message is emitted.
]]
local added_vanc_errs = false; -- flag so we only emit one Vancouver error / category
local function add_vanc_error ()
if not added_vanc_errs then
added_vanc_errs = true; -- note that we've added this category
append_error( 'vancouver', {});
end
end
--[[--------------------------< I S _ G O O D _ V A N C _ N A M E >--------------------------------------------
For Vancouver Style, author/editor names are supposed to be rendered in Latin (read ASCII) characters. When a name
uses characters that contain diacritical marks, those characters are to converted to the corresponding Latin character.
When a name is written using a non-Latin alphabet or logogram, that name is to be transliterated into Latin characters.
These things are not currently possible in this module so are left to the editor to do.
This test allows |first= and |last= names to contain any of the letters defined in the four Unicode Latin character sets
[http://www.unicode.org/charts/PDF/U0000.pdf C0 Controls and Basic Latin] 0041–005A, 0061–007A
[http://www.unicode.org/charts/PDF/U0080.pdf C1 Controls and Latin-1 Supplement] 00C0–00D6, 00D8–00F6, 00F8–00FF
[http://www.unicode.org/charts/PDF/U0100.pdf Latin Extended-A] 0100–017F
[http://www.unicode.org/charts/PDF/U0180.pdf Latin Extended-B] 0180–01BF, 01C4–024F
|lastn= also allowed to contain hyphens, spaces, and apostrophes. (http://www.ncbi.nlm.nih.gov/books/NBK7271/box/A35029/)
|firstn= also allowed to contain hyphens, spaces, apostrophes, and periods
At the time of this writing, I had to write the 'if nil == mw.ustring.find ...' test ouside of the code editor and paste it here
because the code editor gets confused between character insertion point and cursor position.
]]
local function is_good_vanc_name (last, first)
if nil == mw.ustring.find (last, "^[A-Za-zÀ-ÖØ-öø-ƿDŽ-ɏ%-%s%']*$") or nil == mw.ustring.find (first, "^[A-Za-zÀ-ÖØ-öø-ƿDŽ-ɏ%-%s%'%.]*$") then
add_vanc_error ();
return false; -- not a string of latin characters; Vancouver required Romanization
end;
return true;
end
--[[--------------------------< R E D U C E _ T O _ I N I T I A L S >------------------------------------------
Attempts to convert names to initials in support of |name-list-format=vanc.
Names in |firstn= may be separated by spaces or hyphens, or for initials, a period. See http://www.ncbi.nlm.nih.gov/books/NBK7271/box/A35062/.
Vancouver style requires family rank designations (Jr, II, III, etc) to be rendered as Jr, 2nd, 3rd, etc. This form is not
currently supported by this code so correctly formed names like Smith JL 2nd are converted to Smith J2. See http://www.ncbi.nlm.nih.gov/books/NBK7271/box/A35085/.
This function uses ustring functions because firstname initials may be any of the unicode Latin characters accepted by is_good_vanc_name ().
]]
local function reduce_to_initials(first)
if mw.ustring.match(first, "^%u%u$") then return first end; -- when first contains just two upper-case letters, nothing to do
local initials = {}
local i = 0; -- counter for number of initials
for word in mw.ustring.gmatch(first, "[^%s%.%-]+") do -- names separated by spaces, hyphens, or periods
table.insert(initials, mw.ustring.sub(word,1,1)) -- Vancouver format does not include full stops.
i = i + 1; -- bump the counter
if 2 <= i then break; end -- only two initials allowed in Vancouver system; if 2, quit
end
return table.concat(initials) -- Vancouver format does not include spaces.
end
--[[--------------------------< L I S T _ P E O P L E >-------------------------------------------------------
Formats a list of people (e.g. authors / editors)
]]
local function list_people(control, people, etal, list_name) -- TODO: why is list_name here? not used in this function
local sep;
local namesep;
local format = control.format
local maximum = control.maximum
local lastauthoramp = control.lastauthoramp;
local text = {}
if 'vanc' == format then -- Vancouver-like author/editor name styling?
sep = ','; -- name-list separator between authors is a comma
namesep = ' '; -- last/first separator is a space
else
sep = ';' -- name-list separator between authors is a semicolon
namesep = ', ' -- last/first separator is <comma><space>
end
if sep:sub(-1,-1) ~= " " then sep = sep .. " " end
if is_set (maximum) and maximum < 1 then return "", 0; end -- returned 0 is for EditorCount; not used for authors
for i,person in ipairs(people) do
if is_set(person.last) then
local mask = person.mask
local one
local sep_one = sep;
if is_set (maximum) and i > maximum then
etal = true;
break;
elseif (mask ~= nil) then
local n = tonumber(mask)
if (n ~= nil) then
one = string.rep("—",n)
else
one = mask;
sep_one = " ";
end
else
one = person.last
local first = person.first
if is_set(first) then
if ( "vanc" == format ) then -- if vancouver format
one = one:gsub ('%.', ''); -- remove periods from surnames (http://www.ncbi.nlm.nih.gov/books/NBK7271/box/A35029/)
if not person.corporate and is_good_vanc_name (one, first) then -- and name is all Latin characters; corporate authors not tested
first = reduce_to_initials(first) -- attempt to convert first name(s) to initials
end
end
one = one .. namesep .. first
end
if is_set(person.link) and person.link ~= control.page_name then
one = make_internal_link(person.link, one, person.origin); -- link author/editor if this page is not the author's/editor's page
end
end
table.insert( text, one )
table.insert( text, sep_one )
end
end
local count = #text / 2; -- (number of names + number of separators) divided by 2
if count > 0 then
if count > 1 and is_set(lastauthoramp) and not etal then
text[#text-2] = " & "; -- replace last separator with ampersand text
end
text[#text] = nil; -- erase the last separator
end
local result = table.concat(text) -- construct list
if etal and is_set (result) then -- etal may be set by |display-authors=etal but we might not have a last-first list
result = result .. sep .. ' ' .. cfg.messages['et al']; -- we've go a last-first list and etal so add et al.
end
return result, count
end
--[[--------------------------< G E T _ D I S P L A Y _ A U T H O R S _ E D I T O R S >------------------------
Returns a number that may or may not limit the length of the author or editor name lists.
When the value assigned to |display-authors= is a number greater than or equal to zero, return the number and
the previous state of the 'etal' flag (false by default but may have been set to true if the name list contains
some variant of the text 'et al.').
When the value assigned to |display-authors= is the keyword 'etal', return a number that is one greater than the
number of authors in the list and set the 'etal' flag true. This will cause the list_people() to display all of
the names in the name list followed by 'et al.'
In all other cases, returns nil and the previous state of the 'etal' flag.
]]
local function get_display_authors_editors (max, count, list_name, etal)
if is_set (max) then
if 'etal' == max:lower():gsub("[ '%.]", '') then -- the :gsub() portion makes 'etal' from a variety of 'et al.' spellings and stylings
max = count + 1; -- number of authors + 1 so display all author name plus et al.
etal = true; -- overrides value set by extract_names()
elseif max:match ('^%d+$') then -- if is a string of numbers
max = tonumber (max); -- make it a number
if max >= count and 'authors' == list_name then -- AUTHORS ONLY -- if |display-xxxxors= value greater than or equal to number of authors/editors
add_maint_cat ('disp_auth_ed', list_name);
end
else -- not a valid keyword or number
append_error( 'invalid_param_val', {'display-' .. list_name, max});
-- add error message
max = nil; -- unset
end
elseif 'authors' == list_name then -- AUTHORS ONLY need to clear implicit et al category
max = count + 1; -- number of authors + 1
end
return max, etal;
end
--[[--------------------------< N A M E _ H A S _ E T A L >----------------------------------------------------
Evaluates the content of author and editor name parameters for variations on the theme of et al. If found,
the et al. is removed, a flag is set to true and the function returns the modified name and the flag.
This function never sets the flag to false but returns it's previous state because it may have been set by
previous passes through this function or by the parameters |display-authors=etal or |display-editors=etal
]]
local function name_has_etal (name, etal, nocat)
if is_set (name) then -- name can be nil in which case just return
local etal_pattern = "[;,]? *[\"']*%f[%a][Ee][Tt] *[Aa][Ll][%.\"']*$" -- variations on the 'et al' theme
local others_pattern = "[;,]? *%f[%a]and [Oo]thers"; -- and alternate to et al.
if name:match (etal_pattern) then -- variants on et al.
name = name:gsub (etal_pattern, ''); -- if found, remove
etal = true; -- set flag (may have been set previously here or by |display-authors=etal)
if not nocat then -- no categorization for |vauthors=
add_maint_cat ('etal'); -- and add a category if not already added
end
elseif name:match (others_pattern) then -- if not 'et al.', then 'and others'?
name = name:gsub (others_pattern, ''); -- if found, remove
etal = true; -- set flag (may have been set previously here or by |display-authors=etal)
if not nocat then -- no categorization for |vauthors=
add_maint_cat ('etal'); -- and add a category if not already added
end
end
end
return name, etal; --
end
--[[--------------------------< E X T R A C T _ N A M E S >----------------------------------------------------
Gets name list from the input arguments
Searches through args in sequential order to find |lastn= and |firstn= parameters (or their aliases), and their matching link and mask parameters.
Stops searching when both |lastn= and |firstn= are not found in args after two sequential attempts: found |last1=, |last2=, and |last3= but doesn't
find |last4= and |last5= then the search is done.
This function emits an error message when there is a |firstn= without a matching |lastn=. When there are 'holes' in the list of last names, |last1= and |last3=
are present but |last2= is missing, an error message is emitted. |lastn= is not required to have a matching |firstn=.
When an author or editor parameter contains some form of 'et al.', the 'et al.' is stripped from the parameter and a flag (etal) returned
that will cause list_people() to add the static 'et al.' text from Module:Citation/CS1/Configuration. This keeps 'et al.' out of the
template's metadata. When this occurs, the page is added to a maintenance category.
]]
local function extract_names(args, list_name)
local names = {}; -- table of names
local last; -- individual name components
local first;
local link;
local mask;
local i = 1; -- loop counter/indexer
local n = 1; -- output table indexer
local count = 0; -- used to count the number of times we haven't found a |last= (or alias for authors, |editor-last or alias for editors)
local etal=false; -- return value set to true when we find some form of et al. in an author parameter
local err_msg_list_name = list_name:match ("(%w+)List") .. 's list'; -- modify AuthorList or EditorList for use in error messages if necessary
while true do
last = select_one( args, cfg.aliases[list_name .. '-Last'], 'redundant_parameters', i ); -- search through args for name components beginning at 1
first = select_one( args, cfg.aliases[list_name .. '-First'], 'redundant_parameters', i );
link = select_one( args, cfg.aliases[list_name .. '-Link'], 'redundant_parameters', i );
mask = select_one( args, cfg.aliases[list_name .. '-Mask'], 'redundant_parameters', i );
last, etal = name_has_etal (last, etal, false); -- find and remove variations on et al.
first, etal = name_has_etal (first, etal, false); -- find and remove variations on et al.
if first and not last then -- if there is a firstn without a matching lastn
append_error( 'first_missing_last', {err_msg_list_name, i}); -- add this error message
elseif not first and not last then -- if both firstn and lastn aren't found, are we done?
count = count + 1; -- number of times we haven't found last and first
if 2 <= count then -- two missing names and we give up
break; -- normal exit or there is a two-name hole in the list; can't tell which
end
else -- we have last with or without a first
names[n] = {
last = last,
first = first,
link = link,
mask = mask,
origin = list_name:match ("(%w+)List"):lower() .. '-link' .. i,
corporate=false
}; -- add this name to our names list (corporate for |vauthors= only)
n = n + 1; -- point to next location in the names table
if 1 == count then -- if the previous name was missing
append_error( 'missing_name', {err_msg_list_name, i-1}); -- add this error message
end
count = 0; -- reset the counter, we're looking for two consecutive missing names
end
i = i + 1; -- point to next args location
end
return names, etal; -- all done, return our list of names
end
--[[--------------------------< P A R S E _ V A U T H O R S _ V E D I T O R S >--------------------------------
This function extracts author / editor names from |vauthors= or |veditors= and finds matching |xxxxor-maskn= and
|xxxxor-linkn= in args. It then returns a table of assembled names just as extract_names() does.
Author / editor names in |vauthors= or |veditors= must be in Vancouver system style. Corporate or institutional names
may sometimes be required and because such names will often fail the is_good_vanc_name() and other format compliance
tests, are wrapped in doubled paranethese ((corporate name)) to suppress the format tests.
This function sets the vancouver error when a reqired comma is missing and when there is a space between an author's initials.
]]
local function parse_vauthors_veditors (args, vparam, list_name)
local names = {}; -- table of names assembled from |vauthors=, |author-maskn=, |author-linkn=
local v_name_table = {};
local etal = false; -- return value set to true when we find some form of et al. vauthors parameter
local last, first, link, mask;
local corporate = false;
vparam, etal = name_has_etal (vparam, etal, true); -- find and remove variations on et al. do not categorize (do it here because et al. might have a period)
if vparam:find ('%[%[') or vparam:find ('%]%]') then -- no wikilinking vauthors names
add_vanc_error ();
end
v_name_table = mw.text.split(vparam, "%s*,%s*") -- names are separated by commas
for i, v_name in ipairs(v_name_table) do
if v_name:match ('^%(%(.+%)%)$') then -- corporate authors are wrapped in doubled parenthese to supress vanc formatting and error detection
first = ''; -- set to empty string for concatenation and because it may have been set for previous author/editor
last = v_name:match ('^%(%((.+)%)%)$')
corporate = true;
elseif string.find(v_name, "%s") then
lastfirstTable = {}
lastfirstTable = mw.text.split(v_name, "%s")
first = table.remove(lastfirstTable); -- removes and returns value of last element in table which should be author intials
last = table.concat(lastfirstTable, " ") -- returns a string that is the concatenation of all other names that are not initials
if mw.ustring.match (last, '%a+%s+%u+%s+%a+') or mw.ustring.match (v_name, ' %u %u$') then
add_vanc_error (); -- matches last II last; the case when a comma is missing or a space between two intiials
end
else
first = ''; -- set to empty string for concatenation and because it may have been set for previous author/editor
last = v_name; -- last name or single corporate name? Doesn't support multiword corporate names? do we need this?
end
if is_set (first) and not mw.ustring.match (first, "^%u?%u$") then -- first shall contain one or two upper-case letters, nothing else
add_vanc_error ();
end
-- this from extract_names ()
link = select_one( args, cfg.aliases[list_name .. '-Link'], 'redundant_parameters', i );
mask = select_one( args, cfg.aliases[list_name .. '-Mask'], 'redundant_parameters', i );
names[i] = {last = last, first = first, link = link, mask = mask, corporate=corporate}; -- add this assembled name to our names list
end
return names, etal; -- all done, return our list of names
end
--[[--------------------------< S E L E C T _ A U T H O R S _ E D I T O R S _ F R O M _ S O U R C E >------------------
Select one of |authors=, |authorn= / |lastn / firstn=, or |vauthors= as the source of the author name list or
select one of |editors=, |editorn= / editor-lastn= / |editor-firstn= or |veditors= as the source of the editor name list.
Only one of these appropriate three will be used. The hierarchy is: |authorn= (and aliases) highest and |authors= lowest and
similarly, |editorn= (and aliases) highest and |editors= lowest
When looking for |authorn= / |editorn= parameters, test |xxxxor1= and |xxxxor2= (and all of their aliases); stops after the second
test which mimicks the test used in extract_names() when looking for a hole in the author name list. There may be a better
way to do this, I just haven't discovered what that way is.
Emits an error message when more than one xxxxor name source is provided.
In this function, vxxxxors = vauthors or veditors; xxxxors = authors or editors as appropriate.
]]
local function select_authors_editors_from_source (vxxxxors, xxxxors, args, list_name, vparam, name_list_format)
local lastfirst = false;
if select_one( args, cfg.aliases[list_name .. '-Last'], 'none', 1 ) or -- do this twice incase we have a first 1 without a last1
select_one( args, cfg.aliases[list_name .. '-Last'], 'none', 2 ) then
lastfirst = true;
end
if ( is_set ( vxxxxors ) and true == lastfirst ) or -- these are the three error conditions
( is_set ( vxxxxors ) and is_set ( xxxxors ) ) or
( lastfirst and is_set ( xxxxors ) ) then
local err_name;
if 'AuthorList' == list_name then -- figure out which name should be used in error message
err_name = 'author';
else
err_name = 'editor';
end
append_error( 'redundant_parameters', {err_name .. '-name-list parameters'});
-- add error message
end
local x, xxxxor_etal;
if not lastfirst then
if is_set ( vxxxxors ) then
x, xxxxor_etal = parse_vauthors_veditors ( args, vparam, list_name );
-- fetch author list from |vxxxxor=, |xxxxor-linkn=, and |xxxxor-maskn=
return x, xxxxor_etal, nil , 'vanc';
elseif is_set ( xxxxors ) then
return {}, nil, xxxxors, name_list_format; -- use content of |xxxxor=
end
end;
x, xxxxor_etal = extract_names ( args, list_name ); -- fetch xxxxor list from |xxxxorn= / |lastn= / |firstn=, |xxxxor-linkn=, and |xxxxor-maskn=, or
return x, xxxxor_etal, nil, name_list_format; -- no xxxxors at all; this allows missing xxxxor name test to run in case there is a first without last
end
local function get_people (handle, para, args, page_name)
local author_etal;
local a = {}; -- authors list from |lastn= / |firstn= pairs or |vauthors=
local Authors;
local NameListFormat = para.namelistformat;
a, author_etal, Authors, NameListFormat = select_authors_editors_from_source(
handle.vauthors,
handle.authors,
args,
'AuthorList',
args.vauthors,
NameListFormat
);
local Coauthors = handle.coauthors;
local editor_etal;
local e = {}; -- editors list from |editor-lastn= / |editor-firstn= pairs or |veditors=
local Editors;
e, editor_etal, Editors, NameListFormat = select_authors_editors_from_source(
handle.veditors,
handle.editors,
args,
'EditorList',
args.veditors,
NameListFormat
);
local t = {}; -- translators list from |translator-lastn= / translator-firstn= pairs
local Translators; -- assembled translators name list
t = extract_names (args, 'TranslatorList'); -- fetch translator list from |translatorn= / |translator-lastn=, -firstn=, -linkn=, -maskn=
local c = {}; -- contributors list from |contributor-lastn= / contributor-firstn= pairs
local Contributors; -- assembled contributors name list
local Contribution = handle.contribution;
if para.contributorsvalid then
c = extract_names (args, 'ContributorList'); -- fetch contributor list from |contributorn= / |contributor-lastn=, -firstn=, -linkn=, -maskn=
if 0 < #c then
if not is_set (Contribution) then -- |contributor= requires |contribution=
append_error( 'contributor_missing_required_param', {'contribution'});
-- add missing contribution error message
c = {}; -- blank the contributors' table; it is used as a flag later
end
if 0 == #a then -- |contributor= requires |author=
append_error( 'contributor_missing_required_param', {'author'});-- add missing author error message
c = {}; -- blank the contributors' table; it is used as a flag later
end
end
else -- if not a book cite
if select_one (args, cfg.aliases['ContributorList-Last'], 'redundant_parameters', 1 ) then -- are there contributor name list parameters?
append_error( 'contributor_ignored', {}); -- add contributor ignored error message
end
Contribution = nil; -- unset
end
local LastAuthorAmp = para.lastauthoramp;
if (in_array (NameListFormat, {'&', 'amp'})) then
LastAuthorAmp = 'yes'; -- override |lastauthoramp = if |name-list-format = is set to '&' or 'amp'
end
local EditorCount; -- used only for choosing {ed.) or (eds.) annotation at end of editor name-list
do
local last_first_list;
local maximum;
local control = {
format = NameListFormat, -- empty string, 'vanc', or 'amp'
maximum = nil, -- as if display-authors or display-editors not set
lastauthoramp = LastAuthorAmp,
page_name = page_name -- get current page name so that we don't wikilink to it via editorlinkn
};
do -- do editor name list first because coauthors can modify control table
maximum , editor_etal = get_display_authors_editors (para.displayeditors, #e, 'editors', editor_etal);
--[[ Preserve old-style implicit et al.
临时修复"Category:含有旧式缩略标签的引用的页面 in editors"的问题，中文版目前与英文版逻辑不一样，暂时不需要这个分类。等以后更新时再看怎么处理 --2017.6.23 shizhao
if not is_set(maximum) and #e == 4 then
maximum = 3;
append_error('implict_etal_editor', {});
end
]]
control.maximum = maximum;
last_first_list, EditorCount = list_people(control, e, editor_etal, 'editor');
if is_set (Editors) then
if editor_etal then
Editors = Editors .. ' ' .. cfg.messages['et al']; -- add et al. to editors parameter beause |display-editors=etal
EditorCount = 2; -- with et al., |editors= is multiple names; spoof to display (eds.) annotation
else
EditorCount = 2; -- we don't know but assume |editors= is multiple names; spoof to display (eds.) annotation
end
else
Editors = last_first_list; -- either an author name list or an empty string
end
if 1 == EditorCount and (true == editor_etal or 1 < #e) then -- only one editor displayed but includes etal then
EditorCount = 2; -- spoof to display (eds.) annotation
end
end
do -- now do translators
control.maximum = #t; -- number of translators
Translators = list_people(control, t, false, 'translator'); -- et al not currently supported
end
do -- now do contributors
control.maximum = #c; -- number of contributors
Contributors = list_people(control, c, false, 'contributor'); -- et al not currently supported
end
do -- now do authors
control.maximum , author_etal = get_display_authors_editors (para.displayauthors, #a, 'authors', author_etal);
if is_set(Coauthors) then -- if the coauthor field is also used, prevent ampersand and et al. formatting.
para.lastauthoramp = nil;
control.maximum = #a + 1;
end
last_first_list = list_people(control, a, author_etal, 'author');
if is_set (Authors) then
Authors, author_etal = name_has_etal (Authors, author_etal, false); -- find and remove variations on et al.
if author_etal then
Authors = Authors .. ' ' .. cfg.messages['et al']; -- add et al. to authors parameter
end
else
Authors = last_first_list; -- either an author name list or an empty string
end
end -- end of do
if is_set(Authors) then
if is_set(Coauthors) then
if 'vanc' == NameListFormat then -- separate authors and coauthors with proper name-list-separator
Authors = Authors .. ', ' .. Coauthors;
else
Authors = Authors .. '; ' .. Coauthors;
end
end
elseif is_set(Coauthors) then -- coauthors aren't displayed if one of authors=, authorn=, or lastn= isn't specified
append_error('coauthors_missing_author', {}); -- emit error message
end
end
local multiple_editors = EditorCount >1;
local has_contributors = false;
local NameList = {}; -- holds selected contributor, author, editor name list
if #c > 0 then -- if there is a contributor list
NameList = c; -- select it
has_contributor = true;
elseif #a > 0 then -- or an author list
NameList = a;
elseif #e > 0 then -- or an editor list
NameList = e;
end
return Authors, Contributors, Editors, Translators, Contribution, NameList, multiple_editors, has_contributors;
end
--[[--------------------------< T E R M I N A T E _ N A M E _ L I S T >----------------------------------------
This function terminates a name list (author, contributor, editor) with a separator character (sepc) and a space
when the last character is not a sepc character or when the last three characters are not sepc followed by two
closing square brackets (close of a wikilink). When either of these is true, the name_list is terminated with a
single space character.
]]
local function terminate_name_list (name_list, sepc)
if (string.sub (name_list,-1,-1) == sepc) or (string.sub (name_list,-3,-1) == sepc .. ']]') then -- if last name in list ends with sepc char
return name_list .. " "; -- don't add another
else
return name_list .. sepc .. ' '; -- otherwise terninate the name list
end
end
--[[--------------------------< F O R M A T _ P E O P L E >------------------------------------------------
]]
local function format_people (Authors, Editors, Contributors, multiple_editors, use_in, sepc)
if is_set (Authors) then
Authors = terminate_name_list (Authors, sepc); -- when no date, terminate with 0 or 1 sepc and a space
if is_set (Editors) then
local in_text = " ";
local post_text = "";
if use_in then
in_text = in_text .. " " .. cfg.messages['in'];
if (sepc ~= '.') then in_text = in_text:lower() end -- lowercase for cs2
else
if multiple_editors then
post_text = ", " .. cfg.messages['editors'];
else
post_text = ", " .. cfg.messages['editor'];
end
end
Editors = terminate_name_list (Editors .. in_text .. post_text, sepc);
-- terminate with 0 or 1 sepc and a space
end
if is_set (Contributors) then -- book cite and we're citing the intro, preface, etc
local by_text = sepc .. ' ' .. cfg.messages['by'] .. ' ';
if (sepc ~= '.') then by_text = by_text:lower() end -- lowercase for cs2
Authors = by_text .. Authors; -- author follows title so tweak it here
if is_set (Editors) then -- when Editors make sure that Authors gets terminated
Authors = terminate_name_list (Authors, sepc); -- terminate with 0 or 1 sepc and a space
end
Contributors = terminate_name_list (Contributors, sepc); -- terminate with 0 or 1 sepc and a space
end
else
if is_set (Editors) then
if multiple_editors then
Editors = Editors .. " (" .. cfg.messages['editors'] .. ")" .. sepc .. " "
else
Editors = Editors .. " (" .. cfg.messages['editor'] .. ")" .. sepc .. " "
end
end
end
return Authors, Editors, Contributors;
end
--[[--------------------------< S E T _ S E L E C T E D _ M O D U L E S >--------------------------------------
Sets local cfg table to same (live or sandbox) as that used by the other modules.
]]
local function set_selected_modules (cfg_table_ptr, utilities_page_ptr, error_page_ptr, links_page_ptr)
cfg = cfg_table_ptr;
is_set = utilities_page_ptr.is_set;
in_array = utilities_page_ptr.in_array;
add_maint_cat = error_page_ptr.add_maint_cat;
append_error = error_page_ptr.append_error;
select_one = error_page_ptr.select_one;
make_internal_link = links_page_ptr.make_internal_link;
end
--[[--------------------------< E X P O R T E D F U N C T I O N S >------------------------------------------
]]
return {
get_people = get_people,
format_people = format_people,
set_selected_modules = set_selected_modules
}